Field Bus

Field Bus

Dijital IO Modüler RP2D-0016C1

The Characteristics of the DI Channel

  • The Input Signal and Internal Signal is Isolated by Photoelectric Coupling Technique
  • The Rated Voltage Supply is 24V DC
  • Each Group Has Four Routs Output
  • The Rated Output Current of Each Rout is 500mA
  • The Highest Output Frequency:1KH

Dijital IO Modüler RP2D-1608C1

The Characteristics of DI Channel
  •  Signal on Site and Internal Signal is Isolated by Photoelectric Coupling Technique
  • A Group of Four Channels Use One Common Terminal, Two Common Terminals are Isolated from Each Other.
  • A Group of Four Channels can Use Both NPN and PNP Input.
  • The Range of Input level :12~24VDC,Input Current>4mA
  • Response Time of Input:10ms
  • Each Channel has its Independent State Indicator
The Characteristics of DO Channel:
  • Signal on Site and Internal Signal are Isolated by Photoelectric Coupling Technique.
  • The Rated Voltage Supply is 24V DC.
  • Each Group has Four Channels Outputs.
  • The Rated Output Current of Each Channel is 500mA.
  • The Maximum Output Frequency:1KH.
Devamı

Servo Sürücü ve Motorlar

Servo Sürücü ve Motorlar

Servo Sürücüler

  1. JD Serisi
  2. ED Serisi
  3. CD Serisi
  4. FD Serisi

JD430 Servo Sürücü

Power Main supply voltage AC220V±15%  50~60Hz
Control circuit voltage DC18V~DC30V
Current Rated current(RMS) 10A
Peak current(PEAK) 27.5A
Brake chopper threshold DC380V±5V
Over-voltage alarming threshold DC400V±5V
Under-voltage alarming threshold DC200V±5V
Cooling method Cooling with fan
Size(width*hight*thicker) 220 x 195 x 66 mm
Operation
Environment
Operating temperature 0~40
Storage temperature -10~70
Humidity(non-condensing) 5~85%
Protection class IP20
Installation environment Installed in a dust-free,dry and lockable environment
Installation mode Vertical installation
Altitude Below 1000m
Atmospheric pressure 86kpa~106kpa
Genernal function Digital operation panel 4 buttons and 4 LED display
External I/O 8 digital input  12.5~30V.  7 digital output: OUT1, OUT2, OUT7 are 0.1A and OUT3 OUT6 are 0.5A . The input and outpput function can be defined freely.
Analog input 2 analog input, can be used to control speed and torque, the input rang is -10V~10V
Encoder signal output function Output encoder signal and master encoder signal are optional, can be used in the multiple axises synchronization application, the max. output frequency is 2MHz
Master singnal input function Can receive 3.3V~24V pluse/direction signal, CW/CCW signal. And the RS422 difference signal, the max. input frequency is 4MHz
Feedback signal Incremental A.B.Z.U.V.W.A/.B/.Z/.U/.V/.W/. Signal.
RS232 THe max. baudrate is 115.2 KHz, use JD-PC software to communicate with PC
RS485 THe max. baudrate is 115.2 KHz, use Modbus RTU protocol to communicate with control
CAN BUS THe max. baudrate is 1MHz,  use CANopen protocol to communicate with controller
STO function STO port can be connect to safe controller, switch, and sensor to protect the system

JD620 Servo Sürücü

●CANopen communication
●STO (Safe Torque Off) make sure the safe running
●Strong anti-interference ability
●Isolation protection on communication port
●Main Supply Voltage : AC380V±15% 50~60H

ED430 Servo Sürücü

●Main Supply Voltage : AC220V±15%
●Rated Output Power(KW): 0.1-1.57
●Dimensions mm : 265X165X62 265X165X97

ED620/ED630 Servo Sürücü

●Main Supply Voltag: 3-Phase AC380V±15%
●Rated Output Power(KW):1.2-4.0
●Dimensions mm : 300X166X115.5 300X166X125.5

CD420 Servo Sürücü

●Main Supply Voltage : AC220V±20% 47~63Hz
●Rated Output Power(KW): 0.2-0.75
●Dimensions mm : 166X141X61

  • CD430 Servo Sürücü
  • CD620 Servo Sürücü
  • CD120 Servo Sürücü

FD Serisi

0.2-2.3 Kw Aralığında Ürün Çeşitliliği
Puls, Dahili Pozisyonlama, Hız Kontrol Modları
7 Dijital Giriş ( PNP yada NPN Seçilebilir ) – 5 Dijital Çıkış
2 Analog Giriş ile Hız ve Tork Kontrolü, 4 Dijit Kontrol
Paneli
CD-PC Yazılımı ile Bağlanarak Parametre Kontrolü ve Takibi
Parametre Yedekleyebilme ve Yükleyebilme
RS232 Port ile PC yada Kinco HMI ile Bağlantı Haberleşebilme
RS485 Port ile Modbus RTU Protokolü Üzerinden Haberleşebilme
CAN Port ile Maksimum 1 Mhz Haberleşme Hızı ve CAN Open
Cihazlarla Haberleşme Desteği
Çıkış Enkoder Sinyali Opsiyonel, Çoklu Eksen Kontrolünde Eş
Zamanlı Olarak Kullanılabilir, Maksimum Çıkış Frekansı 2 Mhz
16 Dahili Pozisyon ve Hız Ayarı
Yüksek Voltaj, Düşük Voltaj, Motor Isınma, Kısa Devre, Sürücü
Isınma Koruması
IP20 Koruma Sınıfı

Servo Motorlar

SMH 60S Servo Motor

  • ●Rated Power PN (W) :200-400
  • ●Rated Torque TN (Nm) :0.64-1.27
  • ●Rated Speed nN (Rpm):3000
  • Rated Current IN(A): 3.1
  •  Dc Link Voltage:300
  •  Maximum Torque Tm(Nm): 1.92
  •  Maximum Current Im(A): 4.8
  •  Standstill Torque Ts(Nm): 0.7
  •  Standstill Current IS(A): 1.79
  •  Resistance Line-Line RL:8.02
  •  Industance Line-Line LL: 16.3
  •  Electrical Time Constant: 2.03
  •  Mechanical Time Constant: 2.26
  •  Reverse Voltage Constant Ke(V/krpm): 29
  •  Torque Constant Kt(Nm/A):0.48
  •  Rotor Moment Of Intertia Jm(kg.cm2): 0.375
  •  Role Pair Number: 3
  •  Maximum Voltage Rising du/dt: 8
  •  Insulation Class:F Maximum Radial Force F(N): 180
  •  Maximum Axial Force F(N): 90Weight G(kg): 1.3
  •  Length Of Motor L(mm): 120
  •  Position Feedback Device: Incremental Encoder 2500ppr
  •  Cooling Method: Totally Enclosed,non-Ventilated
  •  Protection Level: IP65 For Body ,shaft sealin IP54
  •  Temperature:-20°~40°
  •  Humidity: Below 90% RH (Non condensing)
  •  Ambient Environment: Away From Active Gas,Combustible Gas,Oil Drops And Dust
  • Altitude:Maximum altitude 400m,Rated Power at 1000m or below,Above 1000m: Decreasing 1.5% per 100m Rise
  • SMH 80 Servo Motor
  • SMH 110 Servo Motor
  • SMH 150 Servo Motor
  • SMH 130 Servo Motor
  • SMH 180 Servo Motor
  • SME 80 Servo Motor
  • SME 60 Servo Motor
  • SMH 40S Servo Motor
  • SMH 180 Servo Motor

Step Motor ve Sürücüleri

Step Sürücü

2-Faz Step Sistemler

3-Faz Step Sistemler

  • 2M412 Step Sürücü
  • ●Supply Voltage:DC 12V~40V
    ●Output Current(Peak,Unit:A):0.2~1.2
    ●Input Current:6~16mA
    ●Micro Step:2~256

  • 2M420 Step Sürücü
  • 2M530 Step Sürücü
  • 2M880N Step Sürücü
  • 2M1180N Step Sürücü
  • 2M2280N Step Sürücü
  •  

3M458 Step Sürücü

Model 3M458
Supply Voltage DC 24V ~40V
Output Phase Current 3A~ 5.8A
Control Signal Input Current 6~16mA
Cooling Method Natural Air Cooling
Operating Environment Avoid the Environment with a Great Amount of Metallic Powder, Oil Mist, or Erosive Gases
Operating Temperature -10°C~ +45°C
Operating Humidity < 85% (Non-Condensing)
Weight 0.7 Kg

3M2280N Step Sürücü

●Input Voltage:Single-Phase 220V AC +/-15% (50Hz)(187VAC~253VAC)
●Output Current(Peak,Unit:A):2.8-8.0
●Input Current:6~16mA
●Micro Step:400~20,000

Step Motor

2-Faz Step Motorlar

2 Faz 42 Serisi Step Motor

●Phase Current(A):0.87~1.2
●Holding Torque(Nm):0.24~0.32
●Flange Dimension(mm):42.3

2 Faz 56 Serisi Step Motor

2 Faz 86 Serisi Step Motor

2 Faz 110 Serisi Step Motor

2 Faz 130 Serisi Step Motor

3-Faz Step Motorlar

3 Faz 57 Serisi Step Motor

●Phase Current(A):5.2~5.8
●Holding Torque(Nm):0.45~1.5
●Flange Dimension(mm):56.4

3 Faz 85 Serisi Step Motor

●Phase Current(A): 5.8
●Holding Torque(Nm): 2~4
●Flange Dimension(mm):85

Devamı

PLC HMI Yazılımları

PLC HMI Yazılımları

Kinco K3 PLC

Kinco CPU Modüler

CPU304 PLC

 

Model K304-14AT                 K304          K304-14AR              K304-14AX
CPU 16-Bit Industrial
Execution Speed Typical Bool Instruction Time: <1μS
Word Operation Time: <96μS
Arithmetic Operation Time for Integers: <130μS
Arithmetic Operation Time for Floating Points: <300μS
DI Points 8XDC24V
DO Points 6XDC24V 6XRelay 3XDC24V+3XRelay
User Program Memory EEPROM, 8KB
Permanent Storage, Without the Need of Battery//1000 Instructions

 

Memory Area Variable Storage Area (V Area): 2KB
System Storage Area (SM Area): 300 Bytes
Internal Storage Area (M Area): 32 Bytes
Data Retention Characteristic Configure with the Programming Software: V Area, C (Counter) Area
Retention Mode and Period Adopt super capacitors and support a retention period of not less than 144 hours upon power failure under normal temperature.
Data Backup Characteristic Perform Backup Operations VB1648 ~ VB1775 According to User Instructions, 128 Bytes in Total
Backup Mode and Time EEPROM (Writing Operation for 1 Million Times) Permanent Backup
Floating Points Supported; the Whole V Area can be Used for Floating Points
Programming Language Supported Ladder Drawing (LD), Instruction List (IL)
Instruction Set Basic Instructions: 55; Expansion Instructions: 251
Password Yes
Protection
Digital Data: 14 in Total (DI8, DO6);
Analog Data: None
Counter 64
Operation Mode of Counter Addition, Subtraction
Counter Range -32768~32767
  • CPU304EX PLC
  • CPU306 PLC
  • CPU306EX PLC
  • CPU308 PLC

Kinco Expansion I/O Modüler

PM321 PLC

Model K321-08DX K321-16DX
Number of input Channels 8 (4 Channels/Group) 16 (8 Channels/Group)
Input Type Source/Sink
Rated Input Voltage DC24V (“1” for DC15~30V)
Rated Input Current 4.1mA@24VDC
Maximum Input Voltage of Logic “0” 5V@0.7mA
Minimum Input Voltage of Logic “1” 15V@2.5mA
Input Filter Delay 5ms
Current Loss of Expansion Bus 5V <60mA <84Ma
24V
Isolation Between Output and Internal Logic Circuit * Mode Photoelectric Coupler
* Voltage 1500VAC/One Minute
Status Indication A Green LED Indicates Signal “1” of Each Channel
Occupied Address Space DI Image Area 1 byte 2 byte
DO Image Area
Dimensions and Weight Dimensions (LXWXH) 114 х 50 х 70mm 114 х 75 х 70mm
Net Weight 125g 150g
  • PM322 PLC
  • PM323 PLC
  • PM331 PLC
  • PM332 PLC
  • PM333 PLC

Kinco Extended Power Modüler

PS380 PLC

●AC85-265V Power Supply
●Capability for Expansion Bus:
+5V ≤ 1300 mA
+24V ≤ 250 mA

Kinco F1 PLC

F122_D1608T PLC

  • High performance CPU
  • Strong developing function
  • Perfect hardware protection measures
  • CANopen bus communication ability
  • Support various communication speed
  • Perfect CANopen software function
  • Perfect PDO communication mode
Devamı

HMI Panel

HMI Panel (Kullanıcı Arayüzü) Sistemleri

Kinco HMI MT4000 Serisi

MT4210T Dokunmatik Panel HMI
MT4220TE Dokunmatik Panel HMI
MT4300C Dokunmatik Panel HMI
MT4310C Dokunmatik Panel HMI
MT4300CE Dokunmatik Panel HMI
MT4300T Dokunmatik Panel HMI
MT4300TE Dokunmatik Panel HMI
MT4404TE Dokunmatik Panel HMI
MT4404T Dokunmatik Panel HMI
MT4414TE Dokunmatik Panel HMI
MT4414TE-CAN Dokunmatik Panel HMI
MT4414T Dokunmatik Panel HMI
MT4424T Dokunmatik Panel HMI
MT4424TE Dokunmatik Panel HMI
MT4403T Dokunmatik Panel HMI
MT4403TE Dokunmatik Panel HMI
MT4522T Dokunmatik Panel HMI
MT4512T Dokunmatik Panel HMI
MT4522TE Dokunmatik Panel HMI
MT4523TE Dokunmatik Panel HMI
MT4523T Dokunmatik Panel HMI
MT4620TE Dokunmatik Panel HMI
MT4513T/ MT4513TE Dokunmatik Panel HMI
MT4434T-MT4434T-MT4434T Dokunmatik Panel HMI
MT4000R Dokunmatik Panel HMI

Kinco HMI MT5000 Serisi

  • MT5320C-DP Dokunmatik Panel HMI
  • MT5320C-CAN MT5320C-CAN Dokunmatik Panel HMI
  • MT5320C-MPI MT5320C-MPI Dokunmatik Panel HMI
  • MT5320C MT5320C Dokunmatik Panel HMI
  • MT5323T-DP MT5323T-DP Dokunmatik Panel HMI
  • MT5323T-CAN MT5323T-CAN Dokunmatik Panel HMI
  • MT5323T-MPI MT5323T-MPI Dokunmatik Panel HMI
  • MT5323T MT5323T Dokunmatik Panel HMI
  • MT5423T-DP MT5423T-DP Dokunmatik Panel HMI
  • MT5423T-CAN MT5423T-CAN Dokunmatik Panel HMI
  • MT5423T-MPI MT5423T-MPI Dokunmatik Panel HMI
  • MT5423T MT5423T Dokunmatik Panel HMI
  • MT5520T MT5520T Dokunmatik Panel HMI
  • MT5520T-DP MT5520T-DP Dokunmatik Panel HMI
  • MT5520T-CAN MT5520T-CAN Dokunmatik Panel HMI
  • MT5520T-MPI MT5520T-MPI Dokunmatik Panel HMI
  • MT5620T MT5620T Dokunmatik Panel HMI MT5620T-MPI
  • MT5620T-MPI Dokunmatik Panel HMI
  • MT5620T-CAN MT5620T-CAN Dokunmatik Panel HMI
  • MT5620T-DP MT5620T-DP Dokunmatik Panel HMI
  • MT5720T MT5720T-CAN Dokunmatik Panel HMI
  • MT5720T-MPI MT5720T-MPI Dokunmatik Panel HMI

Kinco HMI MT6000 Serisi

  • MT6300C Dokunmatik Panel HMI
  • MT6300C-CAN MT6300C-CAN Dokunmatik Panel HMI
  • MT6300T MT6300T Dokunmatik Panel HMI
  • MT6300T-CAN MT6300T-CAN Dokunmatik Panel HMI
  • MT6400T-CAN MT6400T-CAN Dokunmatik Panel HMI
  • MT6400T MT6400T Dokunmatik Panel HMI
  • MT6500T MT6500T Dokunmatik Panel HMI
  • MT6500T-CAN MT6500T-CAN Dokunmatik Panel HMI

Kinco HMI Text Display

MD204L

Model MD204L
Display 4.3″FSTN
Resolution 192 x64 Pixel(Supporting Display of 4 Lines 12 Chinese Characters)
LCM life time Greater than 50,000 Hours at 252℃, 65±10%RH
Brightness 60 cd/m²
Color Monochromatic
Contrast Adjustable by Potentiometer
Backlight Long Service Life Yellow / Green LED
CPU 8-bit Processor
Memory 64KB Flash ROM
COM port COM1: PC RS232 & PLC RS485/422 & PLC RS232
Real-time clock Optional
Function key 20 Keys, Customizable(Including 12 Numeric Input Keys)
Printer port N/A
Allowable power failure Within 20ms
Power supply 12~24 VDC ±10% <150mA @ 24VDC
Interference immunity test Voltage 1500Vp-p,Pulse cycle 1us,Duration 1s
Dielectric strength 500V AC (1 min)
Isolation resistance Exceed 10M at 500V DC
Vibration endurance 10 to 25 Hz(x, y, z Direction, 2G, 30 Minutes)
Protection class IP65 Front Panel
Operating temperature 0 ~ 50 °C
Operating humidity 20 ~ 90 % RH (non-condensing)
Storage temperature -20 °C ~70 °C
Enclosure Engineering Plastic ABS + PC
Dimensions(W x H x D) 172 × 95 × 30mm
Display size(W x H) 101 × 36 mm
Panel cutout dimension 165 × 86mm
Cooling method Natural Air Cooling
Weight 0.3 Kg

MD214L

MD224L

MD224L

MD304L

MD304L

Kinco HMI F07 ve F10 Serisi Waterproof

HMI F07 ve F10 Serisi Waterproof

 Genel Özellikler

  • IP65 Koruma Sınıfı ile Su Sızdırmaz ve Vibrasyona Dayanıklı Kasa
  • Kolay Kullanım ve USB Disk ile Program Yükleyebilme
  • Gerçek Zaman Saati ve Reçete Fonksiyonu
  • 1280×800 Piksel Yüksek Çözünürlük
  • 128 MB Flash ve 64 MB SD Ram
  • 800 Mhz RISC Yüksek Hızlı İşlemci
  • 7” ve 10.1” Ekran Boyutları
  • 2xSeri Haberleşme Portu
  • Modern ve İnce Tasarım
  • 65535 Renk

Kinco HMI CZ10 Serisi

HMI CZ10 Serisi

 Genel Özellikler

  • RISC Cortex-A8 800 MHz Hızlı, Güçlü ve Yüksek Performanslı İşlemci
  • Yüksek Depolama Alanı
  • 256 MB Flash ve 256 MB DDR3 Ram
  • 2xCAN-Open Haberleşme Arayüzü
  • 2xSeri Haberleşme Portu
  • 2xVideo Kamera Girişi
  • Ayarlanabilir Arka Aydınlatma ile Gece Kolay Görünüm Kolaylığı
  • Geniş Çalışma Sıcaklığı Aralığı, Yüksek Parlaklık, Güneş Işığında Net Görünüm
  • Metal Kasası ile Güçlü Soğutma, Darbelere Karşı Koruma, Ekstra Elektriksel Gürültü Koruması
  • 18 Programlanabilir Fonksiyonel Tuş Takımı
  • Gerçek Zamanı Saati ve Reçete Fonksiyonu

Fiyatlar için firmamızla iletişime geçebilirsiniz.

Devamı