Servo Sürücü ve Motorlar

Servo Sürücüler

  1. JD Serisi
  2. ED Serisi
  3. CD Serisi
  4. FD Serisi

JD430 Servo Sürücü

Power Main supply voltage AC220V±15%  50~60Hz
Control circuit voltage DC18V~DC30V
Current Rated current(RMS) 10A
Peak current(PEAK) 27.5A
Brake chopper threshold DC380V±5V
Over-voltage alarming threshold DC400V±5V
Under-voltage alarming threshold DC200V±5V
Cooling method Cooling with fan
Size(width*hight*thicker) 220 x 195 x 66 mm
Operation
Environment
Operating temperature 0~40
Storage temperature -10~70
Humidity(non-condensing) 5~85%
Protection class IP20
Installation environment Installed in a dust-free,dry and lockable environment
Installation mode Vertical installation
Altitude Below 1000m
Atmospheric pressure 86kpa~106kpa
Genernal function Digital operation panel 4 buttons and 4 LED display
External I/O 8 digital input  12.5~30V.  7 digital output: OUT1, OUT2, OUT7 are 0.1A and OUT3 OUT6 are 0.5A . The input and outpput function can be defined freely.
Analog input 2 analog input, can be used to control speed and torque, the input rang is -10V~10V
Encoder signal output function Output encoder signal and master encoder signal are optional, can be used in the multiple axises synchronization application, the max. output frequency is 2MHz
Master singnal input function Can receive 3.3V~24V pluse/direction signal, CW/CCW signal. And the RS422 difference signal, the max. input frequency is 4MHz
Feedback signal Incremental A.B.Z.U.V.W.A/.B/.Z/.U/.V/.W/. Signal.
RS232 THe max. baudrate is 115.2 KHz, use JD-PC software to communicate with PC
RS485 THe max. baudrate is 115.2 KHz, use Modbus RTU protocol to communicate with control
CAN BUS THe max. baudrate is 1MHz,  use CANopen protocol to communicate with controller
STO function STO port can be connect to safe controller, switch, and sensor to protect the system

JD620 Servo Sürücü

●CANopen communication
●STO (Safe Torque Off) make sure the safe running
●Strong anti-interference ability
●Isolation protection on communication port
●Main Supply Voltage : AC380V±15% 50~60H

ED430 Servo Sürücü

●Main Supply Voltage : AC220V±15%
●Rated Output Power(KW): 0.1-1.57
●Dimensions mm : 265X165X62 265X165X97

ED620/ED630 Servo Sürücü

●Main Supply Voltag: 3-Phase AC380V±15%
●Rated Output Power(KW):1.2-4.0
●Dimensions mm : 300X166X115.5 300X166X125.5

CD420 Servo Sürücü

●Main Supply Voltage : AC220V±20% 47~63Hz
●Rated Output Power(KW): 0.2-0.75
●Dimensions mm : 166X141X61

  • CD430 Servo Sürücü
  • CD620 Servo Sürücü
  • CD120 Servo Sürücü

FD Serisi

0.2-2.3 Kw Aralığında Ürün Çeşitliliği
Puls, Dahili Pozisyonlama, Hız Kontrol Modları
7 Dijital Giriş ( PNP yada NPN Seçilebilir ) – 5 Dijital Çıkış
2 Analog Giriş ile Hız ve Tork Kontrolü, 4 Dijit Kontrol
Paneli
CD-PC Yazılımı ile Bağlanarak Parametre Kontrolü ve Takibi
Parametre Yedekleyebilme ve Yükleyebilme
RS232 Port ile PC yada Kinco HMI ile Bağlantı Haberleşebilme
RS485 Port ile Modbus RTU Protokolü Üzerinden Haberleşebilme
CAN Port ile Maksimum 1 Mhz Haberleşme Hızı ve CAN Open
Cihazlarla Haberleşme Desteği
Çıkış Enkoder Sinyali Opsiyonel, Çoklu Eksen Kontrolünde Eş
Zamanlı Olarak Kullanılabilir, Maksimum Çıkış Frekansı 2 Mhz
16 Dahili Pozisyon ve Hız Ayarı
Yüksek Voltaj, Düşük Voltaj, Motor Isınma, Kısa Devre, Sürücü
Isınma Koruması
IP20 Koruma Sınıfı

Servo Motorlar

SMH 60S Servo Motor

  • ●Rated Power PN (W) :200-400
  • ●Rated Torque TN (Nm) :0.64-1.27
  • ●Rated Speed nN (Rpm):3000
  • Rated Current IN(A): 3.1
  •  Dc Link Voltage:300
  •  Maximum Torque Tm(Nm): 1.92
  •  Maximum Current Im(A): 4.8
  •  Standstill Torque Ts(Nm): 0.7
  •  Standstill Current IS(A): 1.79
  •  Resistance Line-Line RL:8.02
  •  Industance Line-Line LL: 16.3
  •  Electrical Time Constant: 2.03
  •  Mechanical Time Constant: 2.26
  •  Reverse Voltage Constant Ke(V/krpm): 29
  •  Torque Constant Kt(Nm/A):0.48
  •  Rotor Moment Of Intertia Jm(kg.cm2): 0.375
  •  Role Pair Number: 3
  •  Maximum Voltage Rising du/dt: 8
  •  Insulation Class:F Maximum Radial Force F(N): 180
  •  Maximum Axial Force F(N): 90Weight G(kg): 1.3
  •  Length Of Motor L(mm): 120
  •  Position Feedback Device: Incremental Encoder 2500ppr
  •  Cooling Method: Totally Enclosed,non-Ventilated
  •  Protection Level: IP65 For Body ,shaft sealin IP54
  •  Temperature:-20°~40°
  •  Humidity: Below 90% RH (Non condensing)
  •  Ambient Environment: Away From Active Gas,Combustible Gas,Oil Drops And Dust
  • Altitude:Maximum altitude 400m,Rated Power at 1000m or below,Above 1000m: Decreasing 1.5% per 100m Rise
  • SMH 80 Servo Motor
  • SMH 110 Servo Motor
  • SMH 150 Servo Motor
  • SMH 130 Servo Motor
  • SMH 180 Servo Motor
  • SME 80 Servo Motor
  • SME 60 Servo Motor
  • SMH 40S Servo Motor
  • SMH 180 Servo Motor

Step Motor ve Sürücüleri

Step Sürücü

2-Faz Step Sistemler

3-Faz Step Sistemler

  • 2M412 Step Sürücü
  • ●Supply Voltage:DC 12V~40V
    ●Output Current(Peak,Unit:A):0.2~1.2
    ●Input Current:6~16mA
    ●Micro Step:2~256

  • 2M420 Step Sürücü
  • 2M530 Step Sürücü
  • 2M880N Step Sürücü
  • 2M1180N Step Sürücü
  • 2M2280N Step Sürücü
  •  

3M458 Step Sürücü

Model 3M458
Supply Voltage DC 24V ~40V
Output Phase Current 3A~ 5.8A
Control Signal Input Current 6~16mA
Cooling Method Natural Air Cooling
Operating Environment Avoid the Environment with a Great Amount of Metallic Powder, Oil Mist, or Erosive Gases
Operating Temperature -10°C~ +45°C
Operating Humidity < 85% (Non-Condensing)
Weight 0.7 Kg

3M2280N Step Sürücü

●Input Voltage:Single-Phase 220V AC +/-15% (50Hz)(187VAC~253VAC)
●Output Current(Peak,Unit:A):2.8-8.0
●Input Current:6~16mA
●Micro Step:400~20,000

Step Motor

2-Faz Step Motorlar

2 Faz 42 Serisi Step Motor

●Phase Current(A):0.87~1.2
●Holding Torque(Nm):0.24~0.32
●Flange Dimension(mm):42.3

2 Faz 56 Serisi Step Motor

2 Faz 86 Serisi Step Motor

2 Faz 110 Serisi Step Motor

2 Faz 130 Serisi Step Motor

3-Faz Step Motorlar

3 Faz 57 Serisi Step Motor

●Phase Current(A):5.2~5.8
●Holding Torque(Nm):0.45~1.5
●Flange Dimension(mm):56.4

3 Faz 85 Serisi Step Motor

●Phase Current(A): 5.8
●Holding Torque(Nm): 2~4
●Flange Dimension(mm):85